applications/AntennaArray: Calculate the array factor and directivity for a uniform linear antenna array.

applications/AmplifierGain: Plot the gain of an amplifier circuit for both ideal and non-ideal response.

applications/AmplifierGainApp: Plot the gain of an amplifier circuit for both ideal and non-ideal response using sliders and input fields.

applications/BandpassFilter: Investigate the frequency response for a Bandpass filter.

applications/BeamDistributedPointLoad: Derive an expression for the deflection of a beam with a distributed load and a point load.

applications/BinaryDistillation: Find the required number of stages for separating two liquid components by using the McCabe-Thiele method.

applications/BoltGroupCoefficient: Calculate the bolt coefficient for eccentrically loaded bolt groups.

applications/ChemicalKineticsParameterEstimation: Estimate the rate parameters for a reversible chemical reaction.

applications/CountercurrentHeatExchanger: Model the temperature dynamics of a countercurrent double-pipe heat exchanger.

applications/EconomicPipeSizing: Minimize the total cost of pipework across the lifetime of a plant.

applications/FilteringAudioApp: Apply filters to a WAV file.

applications/FitHeadFlowRateData: Fit head-flow rate data to a pump curve.

applications/FuelPod: Optimize the design of a fuel pod.

applications/GasOrifice: Calculate the flow rate through a large-diameter orifice.

applications/InteractingTanks: Model liquid flow between three tanks connected by two pipes.

applications/InvertedPendulum: Simulate the dynamics of an inverted pendulum on a cart.

applications/MaxFlowRatePartiallyFilledPipe: Find the maximum flow rate in a partially filled circular pipe.

applications/MaxPressureSurge: Find the excess pressure generated by water hammer due to instantaneous valve closure.

applications/MOSFETParameterEstimation: Estimate the KP and VTO SPICE parameters for an n-channel enhancement mode MOSFET.

applications/PumpPower: Calculate the pump power for flow between two reservoirs.

applications/PyramidalHorn: Calculate the optimum design parameters for an X-band pyramidal horn.

applications/RobotArm: Model a robot arm with three degrees of freedom.

applications/SettlingVelocity: Find the terminal velocity of a particle settling in a fluid.

applications/SimplySupportedBeam: Perform a design analysis on a simply supported beam with torsional loading.

applications/ThreeReservoirProblem: Calculate the flow rates, flow directions, and head at the common junction connecting three reservoirs.

applications/TunedMassDamper: Find the optimum spring and damping constant for a tuned mass damper.

applications/VehicleRide: Analyze vehicle ride and handling.

applications/WaveHeight: Fit wave height data to a probability distribution.

examples/DataSets/BubblePlot: Visualize multiple data sets using BubblePlot.

examples/DataSets/Choropleth/CustomData: Example of visualizing custom data using choropleth maps.

examples/SteadyStateMarkovChain: Compute the steady-state vector of a Markov chain.

examples/SuitcaseModel: Model a two-wheeled suitcase using delay differential equations.

examples/SimpleUnits: Use units in the Simple Units environment.

MathApps/WorldMapProjections: Explore various world map projections.