Sequence Valve - MapleSim Help

All Products Maple MapleSim

Home : Support : Online Help : MapleSim : MapleSim Component Library : Hydraulics : Valves : Sequence Valve

Sequence Valve

Check valve and relief valve connected in parallel

Description

The Sequence Valve component is a check valve and a relief valve connected in parallel, which can be piloted internally or externally.

When pressure at port A is greater than the set pressure of the relief valve, the valve orifice area is assumed to be a piecewise linear function of the pressure difference between port A and port B.

When pressure at port B is greater than the pressure at port A, the check valve orifice area is assumed to be a piecewise linear function and will be affected by the pilot mode selected.

Based on the orifice area, the pressure vs. flow rate relationship is calculated using the formulation in the Orifice component.

	Formulation Approaches
	One of two approaches can be selected for modeling the flow in the device. When the boolean parameter $Use constant Cd$ is true, a constant coefficient of discharge ( $C_{d}$ ) is used, otherwise a variable coefficient of discharge with maximum value ( $C_{d (\max)}$ ) and a critical flow number ( ${Crit}_{no}$ ) are used.

	Optional Volumes
	The boolean parameters Use volume A and Use volume B, when true, add optional volumes $V_{A}$ and $V_{B}$ to ports A and B, respectively. See Port Volumes for details. If two orifices or valves are connected, enabling a volume at the common port reduces the stiffness of the system and improves the solvability.

Equations

$p = p_{A} - p_{B}$

$Orifice Fluid Equations$

${\begin{array}{c} p = \frac{π}{4} \frac{ρ ν q}{C_{d}^{2} A_{cs} \sqrt{π A_{cs}}} {(\frac{16 q^{4}}{π^{2} A_{cs}^{2} ν^{4}} + {Re}_{Cr}^{4})}^{\frac{1}{4}} & Use constant Cd = true \\ q = C_{d (\max)} \tanh (4 \frac{\sqrt{\frac{A_{cs}}{π} \frac{2 |p|}{ρ}}}{ν {Crit}_{no}}) A_{cs} \sqrt{\frac{2 |p|}{ρ}} sign (p) & otherwise \end{array}$

$Pilot Equations$

${\begin{array}{c} A_{cs} = A_{i} = A_{t} & Exact \\ \{A_{cs} = \min (A_{open}, \max (A_{close}, A_{i})), t_{c} \frac{d A_{i}}{d t} + A_{i} = A_{t}\} & otherwise \end{array}$

$p_{tot} = p + {\begin{array}{c} k_{p} p_{C} & dir = 1 \\ - k_{p} p_{C} & otherwise \end{array}$

$S = {\begin{array}{c} smoothness & smoothTransition \\ 0 & otherwise \end{array}$

$q_{C} = 0$

$A_{t} = {\begin{array}{c} {\begin{array}{c} A_{close} & p_{tot} < p_{close1} \\ A_{close} + (A_{open1} - A_{close}) SmoothTrans (S, \frac{p_{tot} - p_{close1}}{p_{open1} - p_{close1}}) & p_{tot} < p_{open1} \\ A_{open1} & otherwise \end{array} & p > 0 \\ {\begin{array}{c} A_{close} & - p \leq p_{close2} \\ A_{close} + (A_{open2} - A_{close}) SmoothTrans (S, \frac{- p - p_{close2}}{p_{open2} - p_{close2}}) & - p < p_{open2} \\ A_{open2} & otherwise \end{array} & otherwise \end{array}$

$Optional Volume Equations$

$V_{f_{A}} = {\begin{array}{c} Va (1 + \frac{p_{A}}{El}) & Use volume A = true \\ 0 & otherwise \end{array} V_{f_{B}} = {\begin{array}{c} Vb (1 + \frac{p_{B}}{El}) & Use volume B = true \\ 0 & otherwise \end{array}$

$q = q_{A} - q_{V_{A}} = - (q_{B} - q_{V_{B}})$

$q_{V_{A}} = {\begin{array}{c} \frac{d V_{f_{A}}}{d t} & Use volume A = true \\ 0 & otherwise \end{array} q_{V_{B}} = {\begin{array}{c} \frac{d V_{f_{B}}}{d t} & Use volume B = true \\ 0 & otherwise \end{array}$

Variables

Name	Units	Description	Modelica ID
$p$	$Pa$	Pressure drop from A to B	p
$p_{X}$	$Pa$	Pressure at port X	pX
$q$	$\frac{m^{3}}{s}$	Flow rate from port A to port B	q
$q_{X}$	$\frac{m^{3}}{s}$	Flow rate into port X	q
$q_{V_{X}}$	$\frac{m^{3}}{s}$	Flow rate into port X's optional volume	qVX
$V_{f_{X}}$	$m^{3}$	Effective volume at port X	VfX

$X, Y \in \{A, B\}$

Connections

Name	Description	Modelica ID
$portA$	Upstream hydraulic port	portA
$portB$	Downstream hydraulic port	portB
$portC$	Hydraulic port for external pilot	portC

Parameters

General

Name	Default	Units	Description	Modelica ID
$Smooth Transition$	$false$		True (checked) means enable the smoothness factor	smoothTransition
$smoothness$	$0.5$		Smoothness factor (0: sharpest, 1: smoothest); used when $Smooth Transition$ is enabled	smoothness

Orifice

Name	Default	Units	Description	Modelica ID
$Use constant Cd$	$true$		True (checked) means a constant coefficient of discharge is implemented, otherwise a variable $C_{d}$ is used in flow calculations	UseConstantCd
$C_{d}$	$0.7$		Flow-discharge coefficient; used when $Use constant Cd$ is true	Cd
${Re}_{Cr}$	$12$		Reynolds number at critical flow; used when $Use constant Cd$ is true	ReCr
$C_{d (\max)}$	$0.7$		Maximum flow-discharge coefficient; used when $Use constant Cd$ is false	Cd_max
${Crit}_{no}$	$1000$		Critical flow number; used when $Use constant Cd$ is false	Crit_no

Check Valve Settings

Name	Default	Units	Description	Modelica ID
$p_{close}$	$1.9 \cdot 10^{4}$	$Pa$	Pressure at which valve is fully closed (A = Aclose)	pclose2
$p_{open}$	$2.05 \cdot 10^{4}$	$Pa$	Pressure at which valve is fully open (A = Aopen)	popen2
$A_{open}$	$1 \cdot 10^{−5}$	$m^{2}$	Valve area when fully open	Aopen2

Leakage

Name	Default	Units	Description	Modelica ID
$A_{close}$	$1 \cdot 10^{−12}$	$m^{2}$	Valve area when closed (leakage)	Aclose

Pilot

Name	Default	Units	Description	Modelica ID
Mode	$Internal$		Pilot type (Internal or External)	mode

Pressure Ratios

Name	Default	Units	Description	Modelica ID
$k_{pilot}$	$3$		Pilot ratio	kp1

Relief Settings

Name	Default	Units	Description	Modelica ID
$p_{close}$	$1.9 \cdot 10^{7}$	$Pa$	Pressure at which valve is fully closed (A = Aclose)	pclose1
$p_{open}$	$2.05 \cdot 10^{7}$	$Pa$	Pressure at which valve is fully open (A = Aopen)	popen1
$A_{open}$	$1 \cdot 10^{−5}$	$m^{2}$	Valve area when fully open	Aopen1

Valve Dynamics

Name	Default	Units	Description	Modelica ID
$Exact$	$false$		When false (not checked) first-order dynamics are used for the valve area	Exact
$t_{c}$	$0.1$	$s$	Time constant	tc

Optional Volumes

Name	Default	Units	Description	Modelica ID
$Use volume A$	$false$		True (checked) means a hydraulic volume chamber is added to portA	useVolumeA
$V_{A}$	$1 \cdot 10^{−6}$	$m^{3}$	Volume of chamber A	Va
$Use volume B$	$false$		True (checked) means a hydraulic volume chamber is added to portB	useVolumeB
$V_{B}$	$1 \cdot 10^{−6}$	$m^{3}$	Volume of chamber B	Vb

For more information see Port Volumes.

Fluid Parameters

The following parameters, used in the equations, are properties of the Hydraulic System Properties component used in the model.

Name	Units	Description	Modelica ID
$ν$	$\frac{m^{2}}{s}$	Kinematic viscosity of fluid	nu
$ρ$	$\frac{kg}{m^{3}}$	Density of fluid	rho
$El$	$Pa$	Bulk modulus of fluid	El

Maple

Maple Add-Ons

MapleSim

MapleSim Add-Ons

Systems Engineering

Consulting Services

Maple T.A. and Möbius

Education

Industries

Automotive and Aerospace

Robotics

Machine Design & Industrial Automation

Other

Application Areas

Product Pricing

Purchasing

Institutional Student Licensing

Maplesoft Elite Maintenance (EMP)

Support

Product Training

Online Product Help

Webinars & Events

Publications

Content Hubs

Examples & Applications

Community

About Maplesoft

Media Center

User Community

Contact

Online Help

All Products Maple MapleSim

Maple

Powerful math software that is easy to use

Maple Add-Ons

MapleSim

Advanced System Level Modeling

MapleSim Add-Ons

Systems Engineering

Consulting Services

Maple T.A. and Möbius

Education

Industries

Automotive and Aerospace

Robotics

Machine Design & Industrial Automation

Other

Application Areas

Product Pricing

Purchasing

Institutional Student Licensing

Maplesoft Elite Maintenance (EMP)

Support

Product Training

Online Product Help

Webinars & Events

Publications

Content Hubs

Examples & Applications

Community

About Maplesoft

Media Center

User Community

Contact

Online Help

All Products Maple MapleSim