Relief Valve with Pressure-Dependent Area

All Products Maple MapleSim

Home : Support : Online Help : MapleSim : MapleSim Component Library : Hydraulics : Valves : Relief Valve with Pressure-Dependent Area

Relief Valve with Pressure-Dependent Area

Relief valve with opening area computed from table of pressure vs. area

Description

The Relief Valve with Pressure-Dependent Area (or Relief Valve Pressure Dependent Area) component models the flow through an orifice where the relationship between the area of the orifice and the pressure difference between port A and port B is supplied in the form of a table. Based on the orifice area, the pressure vs flow rate relationships are derived by the formulation used in the Orifice component.

Pressure vs Area

For this component, the orifice area must be specified as a function of the pressure difference in the form of a table. The following parameters allows users to specify the necessary data for this calculation.

Data Source: This parameter allows users to specify the nature of the source file for the Pressure vs. Area table. The available options are file, attachment, and inline.

file: Use this option to specify a source file (an Excel or a CSV file) located on the hard drive. Use the $A (dP)$ parameter to browse to and/or select the data file. The data file will not be attached to the MapleSim model.

attachment: Use this option to specify a data file (an Excel or a CSV file) that is attached to the MapleSim model. To be used as an attachment, data files must be attached to the MapleSim model and be categorized under Data Sets. The attached files in a MapleSim model can be viewed in the Attachments pane under the Data Sets section. For more information, see Attaching a File to a Model. If the required file is not already attached to the MapleSim model, use the $A (dP)$ parameter to attach a new file.

Note:

If the file option is used, subsequent changes to the source file will be incorporated into MapleSim simulations

If the attachment option is used, subsequent changes to the source file will not affect the version attached to the MapleSim model. To ensure updates to the source files are incorporated in the simulation, the file must be reattached.

The Data Generation App can be used to generate table data from mathematical functions using Maple code. For more information about MapleSim apps, see Using MapleSim Apps.

inline: Use this option to directly specify the pressure vs. area relationship in the form of a table. In the $A (dP)$ parameter, enter an $m \times 2$ matrix. The first column must contain values of pressure difference and the second column must contain corresponding values of the area.

Note: To change the dimensions of table, right-click (Control-click for Mac®) the parameter field and select Edit Matrix Dimensions. In the Matrix Dimensions dialog, enter values for the number or rows and columns and then click OK.

Skip rows: This option allows users to specify the number of top rows to be ignored during the calculations. This option can be useful when the Excel file contains header information.

Smooth: The smooth option specifies how the data table is interpolated.

Pressure difference unit: This option specifies the unit of pressure used in the supplied data.

Area unit: This option specifies the unit of area used in the supplied data.

	Formulation Approaches
	One of two approaches can be selected for modeling the flow in the device. When the boolean parameter $Use constant Cd$ is true, a constant coefficient of discharge ( $C_{d}$ ) is used, otherwise a variable coefficient of discharge with maximum value ( $C_{d (\max)}$ ) and a critical flow number ( ${Crit}_{no}$ ) are used.

	Optional Volumes
	The boolean parameters Use volume A and Use volume B, when true, add optional volumes $V_{A}$ and $V_{B}$ to ports A and B, respectively. See Port Volumes for details. If two orifices or valves are connected, enabling a volume at the common port reduces the stiffness of the system and improves the solvability.

Equations

$p = p_{A} - p_{B}$

$Orifice Fluid Equations$

${\begin{array}{c} p = \frac{π}{4} \frac{ρ ν q}{C_{d}^{2} A_{cs} \sqrt{π A_{cs}}} {(\frac{16 q^{4}}{π^{2} A_{cs}^{2} ν^{4}} + {Re}_{Cr}^{4})}^{\frac{1}{4}} & Use constant Cd = true \\ q = C_{d (\max)} \tanh (4 \frac{\sqrt{\frac{A_{cs}}{π} \frac{2 |p|}{ρ}}}{ν {Crit}_{no}}) A_{cs} \sqrt{\frac{2 |p|}{ρ}} sign (p) & otherwise \end{array}$

$A_{i} = MapleSim.Interpolate1D (table, p \cdot p_{unit}, 2, smoothness, skipRows)$

$A_{cs} = \max (\frac{A_{i}}{A_{unit}}, A_{\min})$

$Optional Volume Equations$

$V_{f_{A}} = {\begin{array}{c} Va (1 + \frac{p_{A}}{El}) & Use volume A = true \\ 0 & otherwise \end{array} V_{f_{B}} = {\begin{array}{c} Vb (1 + \frac{p_{B}}{El}) & Use volume B = true \\ 0 & otherwise \end{array}$

$q = q_{A} - q_{V_{A}} = - (q_{B} - q_{V_{B}})$

$q_{V_{A}} = {\begin{array}{c} \frac{d V_{f_{A}}}{d t} & Use volume A = true \\ 0 & otherwise \end{array} q_{V_{B}} = {\begin{array}{c} \frac{d V_{f_{B}}}{d t} & Use volume B = true \\ 0 & otherwise \end{array}$

Variables

Name	Units	Description	Modelica ID
$A_{i}$	$m^{2}$	Interpolated area	Ai
$q_{V_{X}}$	$\frac{m^{3}}{s}$	Flow rate into port X's optional volume	qVX
$V_{f_{X}}$	$m^{3}$	Effective volume at port X	VfX

Connections

Name	Description	Modelica ID
$portA$	Upstream hydraulic port	portA
$portB$	Downstream hydraulic port	portB

Parameters

Area vs. Pressure

Name	Default	Units	Description	Modelica ID
Data source	inline		Data source	datasourcemode
$A (dP)$	[0,0;100,0;100,1;200,1]		Data set	table
Skip rows	$0$		Number of rows to skip	skipRows
Smooth	linear		Smoothness of table interpolation	smoothness
Pressure difference unit ( $p_{unit}$ )	$kPa$		Unit of pressure used in the data	pressUnit
Area unit ( $A_{unit}$ )	${cm}^{2}$		Unit of area used in the data	areaUnit

Orifice

Name	Default	Units	Description	Modelica ID
$Use constant Cd$	$true$		True (checked) means a constant coefficient of discharge is implemented, otherwise a variable $C_{d}$ is used in flow calculations	UseConstantCd
$C_{d}$	$0.7$		Flow-discharge coefficient; used when $Use constant Cd$ is true	Cd
${Re}_{Cr}$	$12$		Reynolds number at critical flow; used when $Use constant Cd$ is true	ReCr
$C_{d (\max)}$	$0.7$		Maximum flow-discharge coefficient; used when $Use constant Cd$ is false	Cd_max
${Crit}_{no}$	$1000$		Critical flow number; used when $Use constant Cd$ is false	Crit_no

Optional Volumes

Name	Default	Units	Description	Modelica ID
$Use volume A$	$false$		True (checked) means a hydraulic volume chamber is added to portA	useVolumeA
$V_{A}$	$1 \cdot 10^{−6}$	$m^{3}$	Volume of chamber A	Va
$Use volume B$	$false$		True (checked) means a hydraulic volume chamber is added to portB	useVolumeB
$V_{B}$	$1 \cdot 10^{−6}$	$m^{3}$	Volume of chamber B	Vb

For more information see Port Volumes.

Fluid Parameters

The following parameters, used in the equations, are properties of the Hydraulic System Properties component used in the model.

Name	Units	Description	Modelica ID
$ν$	$\frac{m^{2}}{s}$	Kinematic viscosity of fluid	nu
$ρ$	$\frac{kg}{m^{3}}$	Density of fluid	rho
$El$	$Pa$	Bulk modulus of fluid	El

Maple

Maple Add-Ons

MapleSim

MapleSim Add-Ons

Systems Engineering

Consulting Services

Maple T.A. and Möbius

Education

Industries

Automotive and Aerospace

Robotics

Machine Design & Industrial Automation

Other

Application Areas

Product Pricing

Purchasing

Institutional Student Licensing

Maplesoft Elite Maintenance (EMP)

Support

Product Training

Online Product Help

Webinars & Events

Publications

Content Hubs

Examples & Applications

Community

About Maplesoft

Media Center

User Community

Contact

Online Help

All Products Maple MapleSim

Maple

Powerful math software that is easy to use

Maple Add-Ons

MapleSim

Advanced System Level Modeling

MapleSim Add-Ons

Systems Engineering

Consulting Services

Maple T.A. and Möbius

Education

Industries

Automotive and Aerospace

Robotics

Machine Design & Industrial Automation

Other

Application Areas

Product Pricing

Purchasing

Institutional Student Licensing

Maplesoft Elite Maintenance (EMP)

Support

Product Training

Online Product Help

Webinars & Events

Publications

Content Hubs

Examples & Applications

Community

About Maplesoft

Media Center

User Community

Contact

Online Help

All Products Maple MapleSim