Select the appropriate installation from the table below. The single
user installation instructions install a single user license file and
do not require running a license server. If you are using a network
license file, you will need to install using a network installation.
This type of installation requires a license server to serve out the
concurrent licenses.
|
Installation
Using Single User Licensing |
Installation
Using Network Licensing
|
After installing Maple, review the following information:
For a complete list of system requirements, see Appendix:
System Requirements.
For installation and start up issues, see Troubleshooting.
Windows Single User Installation
For Windows® 2000, 2003, XP and Windows Vista® single user installation, read this section. For 64-bit Windows, see Windows (64-bit) Single User Installation.
During the installation, you will need your purchase code (sent to you in an email or available on the Maple 12 Installation, Activation, and Technical Support card found in the Maple 12 box).
To install Maple 12 on your Windows operating system, read and complete the following tasks.
64-bit Windows Single User Installation
During the installation, you will need your purchase code (sent to you in an email or available on the Maple 12 Installation, Activation, and Technical Support card found in the Maple 12 box).
To install Maple 12 on your Windows® operating system, read and complete the following tasks.
Return to the Top of the
Document.
Macintosh Single User Installation
For Macintosh® PowerPC and Intel, 32- and 64-bit, single user installation instructions, read this section.
During the installation, you will need your purchase code (sent to you in an email or available on the Maple 12 Installation, Activation, and Technical Support card found in the Maple 12 box).
To install Maple 12 on your Macintosh operating system, read and complete the following tasks.
Return to the Top of the Document.
To install Maple 12 on your 32-bit Linux® operating system, read and complete the following tasks.
Return to the Top of the Document.
To install Maple 12 on your 64-bit Linux operating system, read and complete the following tasks.
Return to the Top of the Document.
A Maple 12 license file (license.dat) will be saved in the license folder of your Maple 12 installation. If you experience difficulties with activation, check our FAQs page at http://www.maplesoft.com/support/Faqs/Activation.
- Activation requires an Internet connection. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.
- Start Standard Worksheet Maple 12.
- When prompted to activate, click Activate.
- You will be prompted to enter your purchase code. If you are activating behind a proxy server, make sure to enter this information before clicking Next.
- You will be prompted to enter additional information. Click Next when this is complete.
*On Windows, you can also activate using the Start menu shortcut: Programs>Maple 12>Tools>Activate Maple 12.
*On Linux, you can also activate by running the activation script located in the bin directory of your Maple 12 installation.
*On Macintosh, you can also activate by running the activation script located in the bin folder of your Maple 12 installation. By default, /Library/Frameworks/Maple.framework/Versions/12/bin.
For Windows® 2000, 2003, XP and Vista installation using a network license, read this section. For 64-bit Windows, see Windows (64-bit) Installation Using a Network License.
To install Maple 12 on your Windows operating system using a network license, read and complete the following tasks.
Maple 12 is now installed. Prior to using Maple 12, you need to configure the license manager.
To install Maple 12 on your Windows operating system using a network license, read and complete the following tasks.
Maple 12 is now installed. Prior to using Maple 12, you need to configure the license manager.
Macintosh Installation Using a Network License
To install Maple 12 on your Macintosh operating system, read and complete the following tasks.
Maple 12 is now installed. Prior to using Maple 12, you need to configure the license manager.
Maple 12 is now installed. Prior to using Maple 12, you need to configure the license manager.
Maple 12 is now installed. Prior to using Maple 12, you need to configure the license manager.
Maple 12 is now installed. Prior to using Maple 12, you need to configure the license manager.
You can create a resource file automatically by running the
installer with the command Maple12WindowsInstaller.exe -r. Follow the on-screen
instructions and complete the installation. The installer.properties
file will be created on your desktop. You can now use this as your
resource for future installs.
Otherwise you can use the example below:
INSTALLER_UI=SILENT
#Choose Install Folder
#---------------------
USER_INSTALL_DIR=C:\\Program Files\\Maple 12
#Install Desktop Shortcuts
#-------------------------
DESKTOP_SHORTCUTS=\"Yes\",\"\"
DESKTOP_SHORTCUTS_1=Yes
DESKTOP_SHORTCUTS_2=
DESKTOP_SHORTCUTS_BOOLEAN_1=1
DESKTOP_SHORTCUTS_BOOLEAN_2=0
#Maple Worksheet Association
#---------------------------
WKS_ASSOC_RESULT=\"Yes\",\"\"
WKS_ASSOC_RESULT_1=Yes
WKS_ASSOC_RESULT_2=
WKS_ASSOC_RESULT_BOOLEAN_1=1
WKS_ASSOC_RESULT_BOOLEAN_2=0
#Choose Watcom Install Folder
#----------------------------
WATCOM_INSTALL_FOLDER=C:\\watcom-1.3
#Maplesoft Activation
#--------------------
RUN_ACTIVATION=\"Activate\",\"\"
RUN_ACTIVATION_1=Activate
RUN_ACTIVATION_2=
RUN_ACTIVATION_BOOLEAN_1=1
RUN_ACTIVATION_BOOLEAN_2=0
USER_PURCHASE_CODE=
USER_PROXY_YES=0
USER_PROXY_NO=1
USER_PROXY_SERVER=
USER_PROXY_PORT=
USER_PROXY_NAME=
USER_PROXY_PASSWORD=
USER_REQUESTED_RESTART=No
| INSTALLER_UI | SILENT needs to be included for silent installation. |
| USER_INSTALL_DIR | The install location. Backslashes, spaces, and end of line characters MUST be escaped; the value CANNOT be contained within quotations. |
| DESKTOP_SHORTCUTS | "No" if you do not want shortcuts on your desktop, "Yes" if you do. |
| USER_REQUESTED_RESTART | "No" if you do not want to restart your computer after installation, "Yes" if you do. |
| RUN_ACTIVATION_BOOLEAN_2 | "0" for running the activation step,
"1" for skipping the activation step. For silent single-user installations, this should be set to 1. Activation can be performed when you start Maple. |
| USER_PURCHASE_CODE | Your purchase code. This value only needs to be set if you are activating during installation. |
| USER_PROXY_YES | "0" if you are not activating behind a proxy server, "1" if you are. Only needs to be set if you are activating. If you set this variable to 1, additional settings need to be made (see below). |
Note: You are not provided with any feedback when you run the
installer in this mode.
Before starting the Windows Network version of Maple 12, you must obtain your license file and start the license manager by completing the following tasks.
Maple 12 requires a Maple 12 license file to operate. License files for earlier versions of Maple do not work with Maple 12. To obtain your license file, you must use the Maple activation program or activate off-line by following the instructions at http://www.maplesoft.com/support/Faqs/Activation. Ensure that you can connect to the Internet as activation requires an Internet connection and follow the steps below. If your computer does not have an Internet connection, please contact Maplesoft customer service.
The \FLEXlm\windows directory, installed in the c:\Program Files\Maple Network Tools directory, contains license manager daemons (lmgrd and maplelmg) required to run Maple, as well as utilities to assist you in installing and configuring FLEXlm for your system.
If you intend to use a Novell® server, see Novell Networks.
To set up and start the license manager daemons on a Windows Network Server:
- From the Start menu, select Programs >Maple Network Tools ->LMTools.
- Under the Service/License File tab, click Configuration using Services.
- Click the Config Services tab.
- In the Config Services property sheet, enter or browse to the following files:
Service Name Enter a name for the service (optional) Path to the lmgrd.exe file C:\Program Files\Maple Network Tools\FLEXlm\windows\lmgrd.exe Path to the license file
C:\Program Files\Maple Network Tools\activate\maple12.lic Path to the debug log file C:\Program Files\Maple Network Tools\FLEXlm\windows\log.txt
- Click Save Service. When prompted to save the service, click Yes.
- Click the Start/Stop/Reread tab. In that property sheet, click Start Server to start the license manager daemons.
You can now use Maple 12.
Return to the Top of the Document.
To run previous releases of Maple as well as Maple 12, you must place all Maple license files in the same directory. If you have other FLEXlm license files stored in one central location, you can store the Maple license files there as well. Note: These steps do not apply to releases prior to Maple 6.
Complete the following tasks:
Using Windows Explorer, move all of the license files to a common directory, for example, C:\Program Files\Maple Network Tools\activate.
Service Name Enter a name for the service (optional) Path to the lmgrd.exe file C:\Program Files\Maple Network Tools\FLEXlm\windows\lmgrd.exe Path to the license file
Enter the path to the directory containing all of the Maple license files. Point to the directory only, not an actual license file.
C:\Program Files\Maple Network Tools\activatePath to the debug log file C:\Program Files\Maple Network Tools\FLEXlm\windows\log.txt
- Enter a name for your service and click Save Service. When prompted to save the service, click Yes.
- Click the Start/Stop/Reread tab, click Start Server to start the license manager daemons.
You can now use Maple 12 and any previous release(s) of Maple.
Return to the Top of the Document.
FLEXlm does not run on Novell or IPX/SPX. Follow these instructions to install the license manager on any network that is exclusively a Novell environment.
Before starting the Mac OS® X Network version of Maple 12, you must obtain your license file and start the license manager by completing the following tasks.
Maple 12 requires a Maple 12 license file to operate. License files for earlier versions of Maple do not work with Maple 12. To obtain your license file, you must use the Maple activation program or activate off-line by following the instructions at http://www.maplesoft.com/support/Faqs/Activation. Ensure that you can connect to the Internet as activation requires an Internet connection and follow the steps below. If your computer does not have an Internet connection, please contact Customer Service.
Before you can use Maple 12, you must start the license server. It is recommended that you do not run lmgrd as root because any process run by root is a potential security risk.
- Navigate to the location of the FLEXlm utilities for your operating system. By default, /Users/username/Applications/Maple_Network_Tools/FLEXlm.
- Start the license manager daemons.
- To start the license manager daemon (lmgrd), enter the following command at the prompt:
./lmgrd -c license_file_path -l debug_log &
where license_file_path is the full path and filename of the network license file (by default, /Users/username/Applications/Maple_Network_Tools/activate/maple12.lic), and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.
Help for Starting the License Server
If you have any problems starting the license server in the system boot up files, refer to http://www.macrovision.com.
You can now use Maple 12.
Return to the Top of the Document.
To run previous releases of Maple as well as Maple 12, place all Maple license files in the same directory. If you have other FLEXlm license files stored in one central location, you can store the Maple license files there as well. Note: This does not apply to releases prior to Maple 6.
Complete the following tasks:
Go to the location of the FLEXlm utilities that are currently being used. For Maple 11, the default location is /Applications/Maple 11/FLEXlm. Enter the command:
./lmdown
Copy all the Maple network license files to /Users/username/Applications/Maple_Network_Tools/activate.
Note: Point to the directory only, not an actual license file.
- To start the license manager, enter the following command:
./lmgrd -c license_file_path -l debug_log
where license_file_path is the full path to the directory containing the license files and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.
You can now use both Maple 12 and any previous release(s) of Maple.
Return to Top of the Document.
Before starting the UNIX Network version of Maple 12, you must obtain your license file and start the license manager by completing the following tasks.
Maple 12 requires a Maple 12 license file to operate. License files for earlier versions of Maple do not work with Maple 12. To obtain your license file, you must use the Maple activation program or activate off-line by following the instructions at http://www.maplesoft.com/support/Faqs/Activation. Ensure that you can connect to the Internet as activation requires an Internet connection and follow the steps below. If your computer does not have an Internet connection, please contact Customer Service.
Before you can use Maple 12, you must start the license server. It is recommended that you do not run lmgrd as root because any process run by root is a potential security risk.
- Navigate to the location of the FLEXlm utilities for your operating system. By default, /home/username/Maple_Network_Tools/FLEXlm/
- Start the license manager daemons.
Using the C Shell
On 64-bit Linux platforms, you must enter the following command before starting the license manager daemon:
setenv LD_ASSUME_KERNEL 2.4.1
To start the license manager daemon (lmgrd), enter the following command at the prompt,
./lmgrd -c license_file_path -l debug_log &
where license_file_path is the full path and filename of the network license file (by default, /home/username/Maple_Network_Tools/activate/Maple12.lic) and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.
Using the Korn or Bourne Shell
On 64-bit Linux platforms, you must enter the following command before starting the license manager daemon:
export LD_ASSUME_KERNEL=2.4.1
To start the license manager daemon (lmgrd), enter the following command at the prompt:
nohup lmgrd -c license_file_path -l debug_log 2>&1 &
Run Daemons on Startup
To have the daemons run on startup, edit the appropriate boot script (such as /etc/rc.boot, /etc/rc.local, or /etc/rc2.d/Sxxxx). For example, if you run lmgrd as a boot startup script, you can run it as a regular user by using the following su command at the prompt:
su username -c 'umask 022; lmgrd_path -c license_file_path -l log_path'
where username is a non-privileged user; lmgrd_path is the correct path to the lmgrd file, license_file_path is the network license file, and log_path is the debug log file. It is recommended that the network license file be called Maple12.lic.
Help for Starting the License Server
If you have any problems starting the license server in the UNIX system boot up files, refer to http://www.macrovision.com.
You can now use Maple 12.
Return to the Top of the Document.
To run previous releases of Maple as well as Maple 12, place all Maple license files in the same directory. If you have other FLEXlm license files stored in one central location, you can store the Maple license files there as well. Note: This does not apply to releases prior to Maple 6.
Complete the following tasks:
Go to the location of the FLEXlm utilities that are currently being used. For Maple 11, the default location is /usr/local/maple11/FLEXlm/UNIX/$PLATFORM where $PLATFORM corresponds to the operating system running the license manager. Enter the command:
./lmdown
Copy all of the Maple network license files to one folder, for example, /home/username/Maple_Network_Tools/activate
Using the C shell: setenv LD_ASSUME_KERNEL 2.4.1
Using the Korn or Bourne shell: export LD_ASSUME_KERNEL=2.4.1
Note: Point to the directory only, not an actual license file.
./lmgrd -c license_file_path -l debug_log
where license_file_path is the full path to the directory containing the license files and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.
You can now use both Maple 12 and any previous release(s) of Maple.
Return to Top of the Document.
Standard Worksheet Maple
You can start Standard Worksheet Maple in either
Document mode or Worksheet mode.
Worksheet mode is most familiar to users of
previous versions of Maple. Enter commands on an input
prompt to get results. You can still format your worksheets
into presentation-quality documents using all of the
new features of Maple 12.
Windows
To start Standard Worksheet Maple 12 in Windows,
Macintosh
To start Standard Worksheet Maple 12 on a Macintosh,
Double-click the Maple 12 icon in the
Applications folder.
Sun Solaris and Linux
To start Standard Worksheet Maple 12 on UNIX or Linux,
Classic Worksheet Maple
Classic Worksheet Maple is not available on the Mac OS X platform, 64-bit Windows or 64-bit Linux.
Windows
To start Classic Worksheet Maple 12 in Windows:
Sun Solaris and Linux
The Classic Worksheet is available on 32-bit Linux and Sun Solaris. A command-line flag is required to start the Classic Worksheet on UNIX versions.
Modify your command search path to contain your Maple 12 directory (for example, /usr/local/maple/bin) and execute maple -cw or execute the full path (for example, /usr/local/maple/bin/maple -cw).
Command-line Maple
The Command-line version of Maple has a text-based user interface. While allowing complete access to the mathematical engine, the Command-line version of Maple requires less system resources. For more information, refer to the Command-line Maple section of the readme.txt file located in your Maple 12 folder.
Excel Add-inOn Windows, Maple 12 has an add-in to Microsoft Excel 2003, 2000, and Excel XP. For more information, refer to the ?Excel help page in the Maple Help system.
Maple Calculator
On Windows, Maple 12 has a convenient graphing calculator interface.
To start the Maple Calculator,
Manuals
You can access electronic versions of the Getting
Started Guide and User Manual from the
Help menu in the Standard Worksheet interface.
Start Maple 12 and select Help>Manuals,
Dictionary, and more>Manuals.
Return to Top of the Document.
You can configure Maple to operate in a way that best suits your environment.
How to Change the Working Directory
In the Windows version of Maple, you can change the working directory by creating a shortcut to Maple 12 and assigning it a different directory.
To change the working directory, follow these instructions:
At start up, Maple searches the current working directory
for a custom initialization file. It stops searching
when it finds the file. For more information, see
How to Execute Commands
Automatically.
How to Execute Commands Automatically
You can configure Maple to automatically execute
a series of commands on start up. This approach is
especially useful for setting global variables such
as Digits and Order.
To do this, create a Maple initialization file. For
more information, refer to ?worksheet/reference/initialization
in the Maple Help System.
How to Change Launch Options for Standard Interface
on Windows
The Standard Worksheet interface reads the ini file bin.win/launch.ini,
if present. The directives recognized are as
follows. (To include a comment, specify a pound character
(#) as the first character in the line. Ensure that
you do not enter any space characters before the pound
character.)
# set maximum Java heap size
maxheap=700m
# additional args to pass to Java
java_args=-Dfoo -Dbar
# additional args to pass to Maple
maple_args=-q
# popup dialog showing the startup command (for debugging)
showcmd=true
# enable the Java access bridge (accessibility)
jaccess=true
# disable directX
java2d_nodraw=true
# set default language
language=Fr
# set default browser
browser="c:/Netscape"
Note: Optimal values are used in the launcher.
How to Enable the MATLAB Link
MATLAB® is an interactive programming language for general scientific and technical computation. If you have MATLAB R2006a or later installed, you can enable a link between MATLAB and Maple for Windows, Macintosh, and most UNIX or Linux platforms. For more information, refer to ?Matlab/setup in the Maple Help System.
Return to Top of the Document.
OpenWatcom (Windows 32-bit only)
For the 32-bit Windows version, Maple 12 includes the OpenWatcom
C compiler. This compiler is used for the Maple compiler feature,
which allows you to compile some types of user-written Maple
routines to speed up the performance of your code.
To use this feature, you must install the OpenWatcom C compiler
when you install Maple 12. The OpenWatcom compiler requires
that it be installed in a location whose name contains no
spaces (the default is C:\watcom-1.3). During installation,
you will have the opportunity to change this default location.
To remove the OpenWatcom C compiler after installation, follow
these steps.
Return to the Top of the Document.
Windows System Requirements
Macintosh System Requirements
32-bit Linux Single User System Requirements
64-bit Linux Single User System Requirements
Sun Solaris System Requirements
Web
Browser Requirements
|
Version |
CPU |
Recommended RAM |
Hard Disk |
|
Windows 2000 Professional |
Intel Pentium III 650 MHz or higher or
fully compatible |
512 MB |
1 GB |
|
Windows 2000 Server |
Intel Pentium III 650 MHz or higher or
fully compatible |
512 MB |
1 GB |
|
Windows XP Pro |
Intel Pentium III 650 MHz or higher or
fully compatible |
512 MB |
1 GB |
|
Windows XP Home |
Intel Pentium III 650 MHz or higher or
fully compatible |
512 MB |
1 GB |
|
Windows 2003 Server
|
Intel Pentium III 650 MHz or higher or
fully compatible
|
512 MB
|
1 GB
|
|
64-bit Windows (XP or Vista) |
AMD X86_64 1 GHz Intel Xeon Intel 64 |
512 MB |
1 GB |
|
Vista Home Basic |
Intel Pentium III 1 GHz |
512 MB |
1 GB |
|
Vista Home Premium Business Ultimate Edition |
Intel Pentium III 1 GHz |
1 GB |
1 GB |
32-bit Linux System Requirements
Vendor |
Operating System Version |
CPU |
Recommended RAM | Hard Disk |
Red Hat |
Enterprise 4 Enterprise 5 |
Intel Pentium III 650 MHz or equivalent | 512 MB | 1 GB |
|
SUSE |
9.3 10.1 10.2 |
Intel Pentium III 650 MHz or equivalent | 512 MB | 1 GB |
Ubuntu |
7
|
Intel Pentium III 650 MHz or equivalent | 512 MB | 2 GB |
Return to Top of the Document.
Issue:
Starting the Maple license server on a Solaris 9 machine returns a
FLEXlm error of -16,287. The debug log contains the following
information:
(maplelmg) Vendor daemon can't talk to lmgrd
(Cannot read data from license server (-16,287:22 "Invalid argument"))
(lmgrd) Vendor daemon died with status 39
Resolution:
This is a known file descriptor problem with FLEXlm and the Solaris
operating system. To workaround this problem, you must create and
execute the following script,
#!/bin/sh
ulimit -n 1024
ulimit -H -n 1024
lmgrd [...]
where [...] represents the arguments you use with lmgrd (e.g. lmgrd -c Maple12.lic -l debug.log). This resets the file descriptor limit for lmgrd, which resolves the problem.
Issue:
Starting Standard Maple on a Windows computer displays a dialog with
the message "connecting..." and then another message indicating that
the firewall is conflicting with Maple.
Resolution:
This is likely due to an interaction between Maple and a personal
firewall installed on the same machine. The firewall can interfere with
establishing an internal network connection on the local computer. The
connection required is to "localhost" on the computer and not a
connection to an external source.
This problem occurs also with single user installations of Maple.
Configure your firewall to grant full permissions to the following
Maple files:
..\Maple
12\jre\bin\maple.exe
..\Maple 12\bin.win\mserver.exe
..\Maple 12\bin.win\cwmaple.exe
..\Maple 12\bin.win\cmaple.exe
Consult your firewall software documentation for details.
Issue:
Maple 12 installed without problems on a Windows computer that has
more than 1 GB of memory, but the Standard worksheet will not start.
The Maple 12 splash screen appears, but the program does not launch.
Resolution:
When Maple starts, it sets the maximum amount of memory Java may
potentially use based on the amount of physical memory in the machine.
If that maximum is too high, Java refuses to start. Therefore, on
machines with a lot of physical memory, Maple may not start either.
This problem has been reported to Sun Microsystems®.
To decrease the amount of memory used by Java on Windows, you can edit the file launch.ini in the Maple bin.win folder (default C:\Program Files\Maple 12\bin.win).
Try adding the line
maxheap=800m
after the line
language=en
to change the heap allocated to 800MB. This change does not affect the amount of memory available to non-Java components of Maple, including the math engine, which will still take advantage of the machine's internal memory when solving large problems.
If this does not work, experiment with the size value to find one that works for you. If you continue to have difficulties, contact Maplesoft Technical Support.
Issue:
Trying to install Maple 12 on a Windows 2003 Server returns the
error "The instructions at "0x004109d0" referenced memory at
0x00000000. Memory could not be written", or the installer quits with
no error message.
Resolution:
This behavior is likely caused by Data Execution Prevention that is
automatically installed and turned on in Windows 2003 Server when SP1
is installed.
To turn off DEP, or to add the Maple installer (and Maple itself) to the list of exceptions for DEP, go to Control Panel>System>Advanced>Data Execution Prevention.
For more information on this see http://support.microsoft.com/kb/875352
Issue:
Upon mounting the Maple 12 CD on my Linux machine no files are
visible.
Resolution:
The Single User CD contains the install files for all three platforms.
Each platform's install files are available only from that platform. If
you are trying to install on Linux and are seeing only Mac OS X files,
it is likely that the CD is not mounted correctly.
Try mounting the CD with the command:
mount -t iso9660 <device> <mountpoint>
This may require root privileges.
Issue:
Upon starting the license server, you get the error "Incorrectly
built binary which accesses errno or h_errno directly. Needs to be
fixed."
This might happen on SUSE 9.x, Mandrake 10, and Red Hat 9 / WS 3.
Resolution:
Enter the following command before starting the license manager daemon:
setenv LD_ASSUME_KERNEL 2.4.1
Issue:
When starting a license server you get the error, "license
manager: can't initialize: Cannot find license file
The license files (or server network addresses) attempted are listed
below. Use LM_LICENSE_FILE to use a different license file, or contact
your software provider for a license file."
Resolution:
Enter the following command before starting the license manager daemon,
setenv LM_LICENSE_FILE license_file_path
where license_file_path is the full path to the directory containing the license files.
Issue:
You are unable to install Maple on a Linux box due to insufficient
space in both /tmp and /home/username.
Resolution:
Install Anywhere uses an environment variable called IATEMPDIR
to assign the location of a temp directory for use during installation.
If neither your /tmp or /home/username directories have
sufficient free space for the required operations, the installation
process will fail.
If you have access to another drive or partition with more free space, you can set a new temp directory using the following two commands:
export
IATEMPDIR=/pathname
setenv IATEMPDIR /pathname
where pathname represents a writable directory with more free space available than the two default directories.
Return to the Top of the Document.
Trademarks
Note: Maple
uses the Macrovision Corporation FLEXlm as its license manager.
This document contains all the information you require for a standard
Maple installation. For more information, refer to the FLEXlm
documentation at http://www.macrovision.com.
Maple, Maplesoft, and Waterloo Maple are trademarks of
Waterloo Maple Inc.
Microsoft, Windows, Windows Vista, Excel and Internet Explorer are registered
trademarks of Microsoft Corporation.
Macintosh and Mac OS are registered trademarks of Apple Computer, Inc.
Sun and Sun Solaris are registered trademarks of Sun Microsystems, Inc.
OpenGL is a registered trademark of Silicon Graphics Inc.
MATLAB is a registered trademark of The MathWorks, Inc.
FLEXlm is a trademark of Macrovision Corporation.
All other brand names or product names are trademarks or registered
trademarks of their respective companies.
Return to the Top of the Document.